|
DVD-103
Multi-Region:
- Turn On machine and Open tray
- Enter 9, 7, 3 and 6
- Screen should show 'region 2'
- Enter 0
- Screen should now show 'region 0'
- Wait for region display to clear
Thanks to John for the information
|
|
DVD-104
Multi-Region:
- Turn the player On
- Open using the remote
- Press Setup
- Press volume buttons Up, Down, Up, Down
- Press Right button
- You will see a number appear in the top right hand corner of your
screen, Keep pressing Right until the number 255
appears.
- Press Setup to exit
- Your player will now be region free
Thanks to Sonia for the information
|
|
DVD-105
Multi-Region:
- Open
the tray
- Press the Setup button on the remote control
- Go to the 5th tab in the Setup mode (Preferences)
- Type in 3, 4, 9, 7, 3 and 4
followed by the region you want to set the machine to (press zero to set
it to 'all regions')
- Press Enter on the remote control
- The player should now be set to your desired region, or to all
regions
Thanks to Phill for the information
|
|
DVD-108
Multi-Region:
- Press the Open button on the front of the player
- Press the Setup button on your remote control
- Using the Left button on your remote control, change the
display to the Preference Page
- Press the Down button on your remote control to highlight the
Set TV Standard option
- Using your remote control, press the buttons 4, 9, 5,
4 and 0, in order, one at a time
NB : You may need to
perform this step quicker if this doesn't work as expected
- The onscreen display will display the currently selected region
- Using the Up and Down buttons on your remote control,
change the region to 1 for region 1, 2 for region
2, and so on, or 0 for multi-region playback
- Press the Setup button on your remote control
- Power Off your player
- Power On your player
Thanks to John for the information
|
|
DVD-230
Multi-Region:
- Make sure the tray is empty
- Power Off and then On again
- It will now say NO DISC in the top left
- Using the remote press the Right key 3 times
- You are now at the Preference Page
- Select the Box at the top of the screen with the Red Tick (this is
to the left of the Yellow Padlock. Do Not Select the Yellow
Padlock)
- Now type in the code 4, 9, 5, 4 and 0
- It will now show 2 as the region
- Using the Down arrow move it to show 0
- Now press Play and then power Off
Thanks to Paul for the information
|
|
DVD-300
Multi-Region:
- Open the players tray and leave it open
- Enter the Setup Menu
- Select Custom (the last option on the Setup Menu)
- Key in 3, 3, 3, 3 (4 numbers)
- Select your code choice (Press FREE for Multi-Region)
- Press Enter then Setup
Thanks to Russ for the information
|
|
DP-301
Multi-Region:
- Make sure drawer is empty
- Press Setup
- Press Right until you on in the box with the red tick on it
and press Play
- Enter the code 4, 9, 5, 4 and 0
- It should show as region 2
- Using the arrows chose desired region (0 is multi region)
- Press Play then power Off
Thanks to Mel for the information
|
|
PDVD-2005
Multi-Region:
- Turn On DVD player (with no disk inside, wait till the 'no
disk' message comes up)
- Open DVD lid using the button on DVD player
- Now using the remote press Up, Down, Up and
Down
- Press numbers 3, 4, 9, 7, 3, 4,
and 0 (the last digit ‘0’ is the region, so it could be replaced
with ‘1’, ‘2’, etc.)
- You should see "region full" appear for a second or two
Thanks to Diddy for the information
|
|
DVD-1030
Multi-Region:
- Press Open button on your remote control to open the drive
tray
- Press the Setup, Next, Next, Next and Next button on remote
- The currently selected region should be displayed on the onscreen
display
- Using the Left button on your remote, change the region to 1 for region 1,
2 for region 2, and so on, or 255 for
multi-region playback
- Press the Setup button on remote
Thanks to Kathy for the information
|
