|
GDP-1104
Multi-Region:
- Open the tray
- Press OSD button on handset
- Screen display appears
- Enter code 2, 8, 1 and 2
- Screen display changes and displays current region
- Press Enter button on handset until desired region appears, 9 is
region free.
- Close the tray
Thanks to Steve for the information
|
|
GDV-100D
NOTE: Please note that these conversions may only work a maximum
of 25 times! And after this time the machine may end up locked to the last
region changed to.
Region One:
Press the buttons Play, 2, 7 and 4 on your
remote control. The onscreen display should look like this: '____ ____'.
Using the number keys on your remote control, enter the code 005000128156.
Press the Play button on your remote control.
The onscreen display should turn red, indicating that your region settings
have been changed.
Region Two:
- Press the buttons Play, 2, 7 and 4 on your
remote control. The onscreen display should look like this: '____ ____'.
- Using the number keys on your remote control, enter the code 002000128156.
- Press the Play button on your remote control.
- The onscreen display should turn red, indicating that your region settings
have been changed.
Factory Reset:
NOTE: This has only been tested on the Philips 710. There is
an outside chance this may also get round the 25 region change limit, but will
not unlock a region locked machine.
Press the buttons Play, 1, 5 and 9 on your
remote control. The onscreen display should look like this: '____ ____'.
Using the number keys on your remote control, enter the code 004001 00014
0.
Press the Play button on your remote control.
The onscreen display should return to the original Philips splash screen,
all settings will be reset back to factory defaults.
|
|
GDV-110, GDV-130
Multi-Region:
Press the Open button on the Remote
Then press Setup
Press the 9 button on the Remote for Region Free, or 1 for Region
1, 2 for Region 2, and so on
Press the buttons 2, 0, 0 and then 0 on the
Remote
Press Step
Press Shuffle
Press Next
Macrovision Hack:
- Press Setup
- Press Stop
- Press Title
- Press Previous
- Press Setup
Firmware Check:
Press Open
Press Setup
Press Shuffle
Press Step
Press Next
A secret menu will appear, inside which you can scroll down until the words Debug
Item appears. This is where the current region status is displayed
Thanks to Bryan for the update
|
|
GDV-200, GDV-210, GDV-212
Multi-Region:
Open the DVD players
tray
Place a Region 1 disc in the tray, but don't close it
Press the buttons 0, 1, 2 and then 3 on the
Remote Control in order, one at a time
Press the Play button on either the Remote or the player
Restore to Region Two:
Open the DVD players tray
Place a Region 2 disc in the tray, but don't close it
Press the buttons Return and then Play on the Remote Control in order, one
at a time
Earlier firmware versions will not play The Matrix and require an
upgrade, this does not remove the hack. Earlier firmware freezes with RCE
encoded discs.
Thanks to Dave for the
information.
|
|
GDV-211A
Multi-Region:
Power On your machine
Press the Stop, Open/Close and Skip buttons on your
player simultaneously and hold down for 3 seconds
A hidden menu should appear. Release the Stop, Open/Close and Skip
buttons on your player
Select Region Number from the hidden menu and choose the Free
option
Exit the menu
Earlier firmware versions will not play The Matrix and require an
upgrade, this does not remove the hack. Earlier firmware freezes with RCE
encoded discs.
|
|
GDV-220
Multi-Region:
- Switch the player On
- Press and hold the following buttons for 3 seconds, Stop, Open
and Skip
- When the hidden menu appears select region free or a specific region
- Exit the menu
|
|
GDV-520
Multi-Region:
- Press Menu
- Now key in 1, 6, 7
- Press 1 for Region 1, 2 for Region 2 and so on
- For Multi-Region mode press Mute
|
|
GDV-620HT
Multi-Region:
Open the the player drawer
Press 9, 8, 1 and 7 on the Remote
You will now be in the hidden menu where you can change the Region from 1 to
6 by pressing Enter on the Remote. Selecting 9 sets it to Region
free
You can also disable Macrovision from this screen
If your TV does not support NTSC, you can also set the output to PAL from
this screen
Thanks to Paul for the information
|
|
Xenaro
GDP-3100, GDP-3200, GDP-4204, GDP-5100, GDP-5120, GDP-6150
Multi-Region:
- Get into the Service Menu. This is not intended for home users, only for
service technicians. Therefore you're asked for an access code, it is 8500
for all Xenaro DVD Players
- Activate "System Messages" using the Service Menu
- Leave the Service Menu and get into the "System Information"
Menu
- When you see the System Info, enter the following code on the remote
control. Note that the player will not print the code on the screen, you have
to enter it blindly.
- The code for the 3100 is: 70307194
- The code for the 3200 is: 70307195
- The code for the 4204 is: 70307196
- The code for the 5100 is: 70307196
- The code for the 5120 is: 70307198
- The code for the 6150 is: 70307192
- A system message should appear. It will not appear if you got the code wrong
or if you did not activate system messages in the service menu. Confirm the
message with Ok on the remote
- Now a window appears in which you can change your region code. Values 1 to 8 and "none" are
possible. "None" will disable the internal check of region
codes (i.e. makes the player CodeFree), but RCE titles might not work. This
doesn't really matter, as you can change the code as often as you wish to match a specific disc
- If you want to, you can disable System Messages again using the Service Menu
after you changed the code
Thanks to Steve for the update
|
